Photoshop实例教程:创建金属光泽图标

2021-11-10 0 440

这个教程将教会你如何创建有个性的、金属的、具有光泽的Adobe图标集。

先看看效果图

Photoshop实例教程:创建金属光泽图标

Step 1: Creating a New Document

第一步:创建一个新文档

Photoshop实例教程:创建金属光泽图标

We are going to create a new document with a standard resolution of 256px. But because our icon is quite short the height will be smaller.

我们将创建一个256像素标准分辨率的新文档.不过我们的图标高度稍微小一点。

Next, grab the Paint Bucket Tool (G), and fill the document with the following colour #F2F2F2. This is to make viewing easier.

然后,使用油漆桶工具(G),使用#F2F2F2颜色填充文档。这是为了查看更轻松。

Step 2: Setting The Base

第二步:设定基础

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Using the Ellipse Tool (U), draw an oval on a new layer as shown above. Let’s name this “Top”.

使用椭圆工具(U)在新层上画一个类似上图的椭圆,取名“TOP”。

Shape layers

Using the Shape layers instead of Fill pixels allows you to transform your circle as many times as you want without quality loss. This is great for experimenting.

形状图层

使用形状图层替代填充像素可以让你任意变换你的形状而没有画质损耗。这是非常值得的尝试。

Step 3: Going 3D

第三步:创建3D效果

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Select your Move Tool (V). While holding down the alt key, press the down arrow 20 times. This will determine the height of the icon. Now select the past duplicates and Merge (ctrl+E). Arrange that layer below the “Top” layer. Remember that there should be one extra layer named “Top”. We’ll just name this new merged layer “3D” for readability.

选择移动工具(V),按着Alt键,按下箭头键20次。这会让图标有高度的感觉。现在选择刚才所有的复制品层,然后选择融合(Ctrl+E)。将这个层放到”Top”层下面。这里会有多个层都叫“Top”,为了区分我们将新融合的层命名为“3D”。

Step 4: Layer Styles

第四步:图层样式

Now we are going to apply some Layer Styles to the “Top” layer (the non-3D one). You can do this by double clicking on the layer.

现在我们要给“Top”层(没有“3D”的那个)添加一些层样式。你可以双击层打开窗口。

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

You should end up with this:

最后结果应该类似这样:

Photoshop实例教程:创建金属光泽图标

Step 5: 3D Layer Styles

第五步:3D图层样式

Now select the “3D” layer and apply the following Layer Styles.

现在选择“3D”图层然后添加如下的层样式

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Once you are done you should have this:

这次完成后应该是这个样子:

Photoshop实例教程:创建金属光泽图标

Step 6: Creating The Shadow

第六步:创建阴影

Create a new layer below the previous two layers and name it “Shadow”. Get the selection of the “Top”layer by ctrl+clicking on the layer icon. Fill the selection with Black and Deselect (ctrl+D) it. Go toFilters>Blur>Gaussian Blur and use 5px. Set the Opacity to 75%. Using the Move Tool (V), shift the shadow down just below the body of the icon.

新建一个层在之前两层下面并命名为“Shadow”。在“Top”层图标上按照Ctrl键点击框选该层。用黑色填充并取消选择(Ctrl+D)。然后选择滤镜–>模糊–>高斯模糊,半径为5px。设置透明度为75%,然后使用移动工具(V)将阴影移动到图标主体的下面。

Photoshop实例教程:创建金属光泽图标

Step 7: Adding Polish

第七步:添加光线修饰

Create new layer right at the top. Get a White Brush with a Hardness of 0% and Master Diameter of 125px. Get the selection of the “3D” layer and Brush once at the corner. Set the Opacity to 85%.

在最上层创建一个新层,选择白色笔刷,硬度为0%,大小为125px。选择“3D”图层的边框,然后在角落刷一下,设置透明度为85%。

Photoshop实例教程:创建金属光泽图标

Create another layer and get a Black Brush with a Hardness of 0% and a Master Diameter of 20pxand Brush it downwards while holding Shift. Use Gaussian Blur with 8px. Now ctrl+click on the “3D” layer icon then ctrl+alt+click on the “Top” layer mask icon. Finally invert your selection withctrl+shift+I and Delete the selection. Repeat the same process with a white Brush with 25px Master Diameter and set the Opacity to 70%.

新建层,然后选择黑色笔刷,硬度0%,大小20px。然后按住Shift键从下向下刷。然后使用高斯模糊,半径为8px。现在按着Ctrl点击“3D”图层的图标,然后按照Ctrl+Alt键点击“Top”图层的遮罩图标。最后用Ctrl+Shift+I反转选择,然后删除已选内容。用白色笔刷,大小25px,重复相同的步骤,设置透明度为70%。

Photoshop实例教程:创建金属光泽图标

Foreground & Background Colour

You can easily switch your background and foreground colour by pressing D. You can swap colours between the two by pressing X.

前景色与背景色

你可以使用D键将前景色和背景色回复为默认。你可以用X键来切换两个颜色。

Step 8: Adding Glow

第八步:添加暗光

Create a new layer and name it “Glow”. Get the selection of the “3D” layer and move it up by 7px. Fillthe selection with the following colour: #6ab2f6. Before deselecting, shift the selection up by another3px and press Delete. Bring down the Fill to 70%.

创建一个新层,命名为“Glow”。选择“3D”图层的可选范围,并向上移动7px。使用#6ab2f6来填充选择的区域。在取消选择前,在向上移动3px然后删除。填充不透明度修改为70%。

Photoshop实例教程:创建金属光泽图标

Now give it the following Layer Styles.

现在修改层样式

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Get the selection of the current layer and create a new layer. Get a White Brush with 0% Hardnessand 300px Diameter and and click once right in the center of the selection. Bring down the Opacity to 70%. Set the Blending Mode to Overlay.

选择当前层内容然后创建新层。使用白色笔刷,硬度为0%,大小300px,然后在选择的中间点击一次。将透明度修改为70%,设置融合模式为叠加。

Photoshop实例教程:创建金属光泽图标

Brush cursor

you can easily find the center of the Brush cursor by pressing Caps Lock. Or you can go toEdit>Preferences>Cursors and enable “Show Crosshair in Brush Tip”.

笔刷光标

你可以通过Caps Lock(大写锁定键)方便的找到笔刷光标的中心。或者你可以在编辑–>首选项–>光标中启用“在画笔笔尖显示十字线”。

Step 9: Adding Definition

第九步:添加鲜明度

Create a new layer and get the selection of the “3D” layer. Fill the selection with any colour you want. I chose black for easier reference. Bring the Fill to 0% and add the following Layer Styles.

创建新层并且选择3D图层的内容。用任何颜色填充已选区域。我选择黑色方便表述。将填充透明度修改为0%,并添加如下图层样式。

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Create another layer and get the selection of the “Top” layer. Shift it down by 4px and Fill it with black. Move the selection up by 2px and press Delete. Apply a 1px Gaussian Blur to it and set the Opacity to 10%.

创建另一个新层,选择“Top”的内容。向下移动4像素然后填充为黑色。向上移动选择区域2px然后按delete键删除。添加一个1px半径的高斯模糊然后设置透明度为10%。

Step 10: Making it Shine

第十步:创建反光

Create a new layer with the Opacity of 75%. Get the selection of the “Top” layer and get a white Brush with 0% Hardness and 250px Diameter. Click once right at the edge of the selection.

创建一个透明度75的新层。选择“Top”层的内容然后使用白色笔刷,硬度0%,250px直径,,在选择的边缘点击一次。

Now create a new layer and get a Pen Tool (P). Draw it as seen below and right-click>Make Selection. Fill it with White. Set Opacity to 25% and Fill to 50%. Get the selection of “Top” layer andInvert Selection (ctrl+shift+I) then press Delete. Apply the following Layer Styles.

创建一个新层,选择钢笔工具(P)。按照下图这个画并右键–>建立选区。填充为白色。设置透明度为25%,填充透明度为50%。选择“Top”层的内容,然后反转选择并删除。再应用以下图层样式。

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Repeat the same process except with a different Layer Style so that it looks like so.

重复步骤让图片看起来像这个一样,图层样式有点不同。

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Create a new layer with 80% Opacity. Click once with a White Brush on the edge of the selection of“Top” layer. It has 0% Hardness, 200px Diameter. Create another layer. With the same selection and same Brush with 70px Diameter, click once at the same spot.

创建一个80%透明度的层。用硬度0%,200px直径的白色画笔在“Top”层的选择内容边缘点击一次。创建另一个层,用同样的选区和70px直径的相同画笔,在相同位置点击一次。

Photoshop实例教程:创建金属光泽图标

With a new layer, get a selection of the “Top” layer and shift it down by 1px. Fill it with White and shift the selection up by 1px then press Delete. Apply Gaussian Blur with 1px.

新建层,选择“Top”层的内容然后向下移动1px。用白色填充然后再向上移动1px然后删除,应用一个半径1px的高斯模糊。

Step 11: Creating The Face

第十一步:创建正面

Duplicate (ctrl+J) the “Top” layer, place it right at the top and rename it to “Inner”. Transform (ctrl+T), and while pressing alt+shift, and shrink it as shown below. Then add the following Layer Styles.

复制(Ctrl+J)“Top”层,放到层的最上面并重命名为“Inner”。按着Alt+Shift变换图形(Ctrl+T)使其像下图一样收缩。然后添加如下层样式。

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Create a new layer and get the selection of “Inner” layer. Using a White Brush click once at the center, bottom edge of the selection. Set the Opacity to 40%.

新建层,选择“Inner”的内容,用白色画笔点击选区的中心,下边界。设置透明度为40%。

Step 12: Creating Depth & Detail

第十二步:创建深度和细节。

Duplicate the “Inner” layer and place it right at the top. Clear the Layer Style by right-clicking on the layer then “Clear Layer Style”. Apply the following Layer Styles to it.

复制“Inner”层,放到层的地步。右键点击层选择“清除图层样式”命令来清除层样式。应用如下样式。

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Create a new layer and get the Gradient Tool. You can select this by first selecting the Fill Tool (G)then pressing Shift+G. Set the colours to Default (D). Select the Radial Gradient option. Get the selection of “Inner” layer and Fill it as shown, then set the Opacity to 20% and Blending Mode to Screen.

新建层,选择渐变工具。你可以先选择填充工具(G)然后按Shift+G来选择。设置颜色为默认(D)。选择放射渐变选项。选择“Inner”内容然后如图填充,然后设置透明度为20%,融合模式为滤色。

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Create a new layer. Get the selection of “Inner” and nudge it down and right once each. Fill it withWhite then nudge it back to it’s original position and press Delete. Set the Opacity to 80%.

新建层,选择“Inner”内容,分别向下,向右轻移一次。用白色填充然后轻移回到原来的位置然后删除。设置透明度为80%。

Create a new layer and while using the same selection, nudge it down by 4px. Fill it with White andnudgeit down another 1px then press Delete. Set the Opacity to 30%.

新建层,用相同的选区向下轻移4px。用白色填充再向下轻移1px然后删除。设置透明度为30%。

Now create a new layer and and grab the Pen Tool and draw the following shape. Notice the point of contact between the shining areas. Also apply the following Layer Styles with 15% Opacity and 50% Fill.

新建层,用钢笔工具画出如图形状。注意提示区域里的连接点。同样应用如图图层样式并设置透明度15%,填充透明度50%。

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Step 13: Adding Alphabets

第十三步:添加字母

Create a new layer and select the Type Tool (T) with any colour. Use Arial as the font and set it toBold and 98px. Any font is fine actually. Now type in “Ps” and place it in the center of the icon. Right-click on the layer and click Rasterize Type. Transform it and shorten it slightly. Right-click the bounding box and click Perspective. Squeeze the top in to make it look 3D. Later add the followingLayer Styles with 0% Fill.

新建层,然后选择字体工具(T)。用Arial字体设置粗体,大小为98px,任意颜色。实际上字体无所谓。现在输入“PS”然后移动到图标的中心。右键图层然后点击栅格化文字。用变换工具稍微缩短一点。右键外围的边框选择透视。将顶部向内部挤让其看起来是3D。然后添加如图的样式,并修改填充透明度为0%。

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Photoshop实例教程:创建金属光泽图标

Step 14: Final Details

第十四步:最后的细节

Create a new layer. Get the selection of the “Ps” layer and nudge it up and right once each. Fill it with White then shift the selection back and press Delete. Set the Opacity to 30%.

新建层,选择“PS”层的内容,分别向上,向右轻移一次。填充白色,并轻移会原来位置删除,设置透明度为30%。

Finally create the last layer and get the selection of the “3D” layer. Fill it with White and applyFilter>Noise>Add Noise with Gaussian and Monochromatic enabled. Set the Blending Mode to Multiply and Opacity to 30%.

新建最后一个层,选择“3D”层内容。填充白色,并应用滤镜–>杂色–>添加杂色,设置为高斯分布,和单色。设置图层融合模式为“正片叠底”,透明度为30%。

Now you are DONE! You can hide or delete the background if you want to export it as an icon. But it’s not over if you want to make a set. For now your icon should look something like this.

现在终于完成!如果你想导出图标你可以隐藏或删除背景。如果你想做一个图标集那还没有结束。现在你的图标应该看来是这个样子的。

Photoshop实例教程:创建金属光泽图标

Step 15: Creating a Set

第十五步:创建图标集

You can save this document and duplicate it. Open the new one and find for the layer called “Glow”. Temporarily hide the layer right above it. Now go Image>Adjustments>Hue/Saturation or (ctrl+U) for layer “Glow” and adjust the Hue to whatever you like. Once you’re done, go to the Layer Style>Outer Glow and adjust the colour to whatever you like. Now you can un-hide your above layer.

你可以先保存这个工程并复制他。打开一个新,然后找到图层Glow。暂时隐藏这个图层上面的图层。现在对“Glow”层选择图像–>调整–>色相和饱和度(Ctlr+U)并调整你喜欢的任意色相。完成后,选择图层–>图层样式–>外发光,调整任意你喜欢的颜色。现在你可以将上面的图层显示出来。

Navigate to your font layer. Delete it and repeat the process I taught you to create another alphabet you want. Remember to change the above layer which is the edge shine. Repeat this step for as many other icons you want.

找到你的字体图层。删除并重复之前创建字母的步骤。记得调整上面的边缘反光图层。

进入论坛参与讨论和交作业:https://xunluyun.com/viewthread.php?tid=479220

1、本站所有言论和图片纯属会员个人意见,与本论坛立场无关 2、其他单位或个人使用、转载或引用本文时必须同时征得该帖子作者和PS工具网的同意 3、请支持我们PS工具网XUNLUYUN.COM 4、本帖部分内容转载自其它媒体,但并不代表本站赞同其观点和对其真实性负责 5、如本帖侵犯到任何版权问题,请立即告知本站,本站将及时予与删除并致以最深的歉意 6、photoshop工具官网管理员和版主有权不事先通知发贴者而删除本文

photoshop官网 ps教程 Photoshop实例教程:创建金属光泽图标 https://xunluyun.com/4342.html

常见问题

相关文章

发表评论
暂无评论
官方客服团队

为您解决烦忧 - 24小时在线 专业服务